# Upward bifolding doors

**URL:** <https://forum.4specs.com/t/upward-bifolding-doors/3419>\
**Category:** MasterFormat 2004 Discussions\
**Created:** [June 18, 2018, 9:38pm UTC](https://forum.4specs.com/t/upward-bifolding-doors/3419 "2018-06-18T21:38:46Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![David\_Axt](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/david_axt/32/24_2.png) [@David\_Axt](https://forum.4specs.com/u/David_Axt)\
**Post date:** [June 18, 2018, 9:38pm UTC](https://forum.4specs.com/t/upward-bifolding-doors/3419/1 "2018-06-18T21:38:46Z")

</div>

What MasterFormat number should I use for upward bifolding doors? I am specifying Wilson Industrial Doors as basis of design. [https://wilsondoors.com/](https://wilsondoors.com/)

---

<div class="post-metadata">

**Author:** ![specman](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/specman/32/222_2.png) [@specman](https://forum.4specs.com/u/specman)\
**Post date:** [June 18, 2018, 10:16pm UTC](https://forum.4specs.com/t/upward-bifolding-doors/3419/2 "2018-06-18T22:16:27Z")

</div>

Here’s what I use: 08 35 13.43 - Overhead Bifold Doors

08 XX 76 is bifolding doors where XX is 13 for metal, 14 for wood, 15 for plastic, and 16 for composite. I believe these are for your standard doors and not a specialty door, such as what you describe. Specialty doors are in 08 30 00, and 08 35 00 is specifically for folding doors and grilles. 08 35 13 is a narrow-scope number for folding doors, so I added a Level 4 number for an even narrower scoped number and title.

I don’t think the CSI police will cite you for creating another Level 3 number, such as 08 35 19.

---

<div class="post-metadata">

**Author:** ![wayne\_yancey](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wayne_yancey/32/228_2.png) [@wayne\_yancey](https://forum.4specs.com/u/wayne_yancey)\
**Post date:** [June 18, 2018, 10:49pm UTC](https://forum.4specs.com/t/upward-bifolding-doors/3419/3 "2018-06-18T22:49:42Z")

</div>

David,

I am using 083633 - SECTIONAL BI-FOLD OVERHEAD DOORS

---

<div class="post-metadata">

**Author:** ![wilsonconsulting](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wilsonconsulting/32/128_2.png) [@wilsonconsulting](https://forum.4specs.com/u/wilsonconsulting)\
**Post date:** [June 19, 2018, 12:07am UTC](https://forum.4specs.com/t/upward-bifolding-doors/3419/4 "2018-06-19T00:07:22Z")

</div>

The dry adhesive systems have their own limitations, so beware before specifying these. Some institutions have had experience w/ carpet tiles not remaining adhered and now only permit wet adhesive installation. As I understand it, they are particularly vulnerable to edge curling and similar problems in high traffic areas.

When these systems were first introduced, I added TacTiles and LokDots to my office master. But in recent years they have rarely been used for projects I have worked on.

---

<div class="post-metadata">

**Author:** ![wilsonconsulting](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wilsonconsulting/32/128_2.png) [@wilsonconsulting](https://forum.4specs.com/u/wilsonconsulting)\
**Post date:** [June 19, 2018, 1:23am UTC](https://forum.4specs.com/t/upward-bifolding-doors/3419/5 "2018-06-19T01:23:47Z")

</div>

Sorry – my password saving software is apparently also saving previous posts. So the response above was copied from a previous message. I tried to delete it, but that function apparently times out after 30 minutes.

---

<div class="post-metadata">

**Author:** ![guest](https://avatars.discourse-cdn.com/v4/letter/g/8dc957/32.png) [@guest](https://forum.4specs.com/u/guest)\
**Post date:** [June 19, 2018, 5:52pm UTC](https://forum.4specs.com/t/upward-bifolding-doors/3419/6 "2018-06-19T17:52:04Z")

</div>

David,  
FYI - Crown Doors, aesthetically, make similar doors, [www.crowndoors.com](http://www.crowndoors.com). However, Crown’s doors are hydraulic-cylinder-operated, i.e., no cables/wires. Crown doors are BOD for current project I’m working on.
