# Specifying IKEA **URL:** \ **Category:** Archive - Specifications Discussions #6\ **Created:** [May 24, 2018, 3:09pm UTC](https://forum.4specs.com/t/specifying-ikea/3410 "2018-05-24T15:09:47Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![hollyrob](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/hollyrob/32/358_2.png) [@hollyrob](https://forum.4specs.com/u/hollyrob)\ **Post date:** [May 24, 2018, 3:09pm UTC](https://forum.4specs.com/t/specifying-ikea/3410/1 "2018-05-24T15:09:47Z")
My intrepid project architect has got me specifying IKEA! How do I do that? Any suggestions? ---
**Author:** ![brian\_payne](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/brian_payne/32/356_2.png) [@brian\_payne](https://forum.4specs.com/u/brian_payne)\ **Post date:** [May 24, 2018, 3:31pm UTC](https://forum.4specs.com/t/specifying-ikea/3410/2 "2018-05-24T15:31:20Z")
12 3200 - Manufactured Wood Casework is where I would start. On a side note…IKEA does NOT to my knowledge make base cabinets that will allow for a 34" high ADA countertop without a decent amount of IKEA hacking. You are fine for single family residential, but multifamily and definitely commercial causes issues. ---
**Author:** ![David\_Axt](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/david_axt/32/24_2.png) [@David\_Axt](https://forum.4specs.com/u/David_Axt)\ **Post date:** [May 24, 2018, 5:15pm UTC](https://forum.4specs.com/t/specifying-ikea/3410/3 "2018-05-24T17:15:20Z")
Helaine, Is this FF&E furniture? ---
**Author:** ![hollyrob](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/hollyrob/32/358_2.png) [@hollyrob](https://forum.4specs.com/u/hollyrob)\ **Post date:** [May 24, 2018, 5:44pm UTC](https://forum.4specs.com/t/specifying-ikea/3410/4 "2018-05-24T17:44:37Z")
David, no. I wish it were. ---
**Author:** ![michael\_chusid](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/michael_chusid/32/211_2.png) [@michael\_chusid](https://forum.4specs.com/u/michael_chusid)\ **Post date:** [May 24, 2018, 7:30pm UTC](https://forum.4specs.com/t/specifying-ikea/3410/5 "2018-05-24T19:30:02Z")
What’s the problem? Just specify Ikea product number and say assemble and install to mfr. instructions. Don’t bother with materials, quality assurance, or anything else. ---
**Author:** ![chris\_grimm\_ccs\_scip](https://avatars.discourse-cdn.com/v4/letter/c/e8c25b/32.png) [@chris\_grimm\_ccs\_scip](https://forum.4specs.com/u/chris_grimm_ccs_scip)\ **Post date:** [May 25, 2018, 2:17am UTC](https://forum.4specs.com/t/specifying-ikea/3410/6 "2018-05-25T02:17:09Z")
Did they give you a specific product, or did they try that thing designers too often do, "basis of design manufacturer but no product? (which is not a BoD of course). If there is at least a product, I would do like Michael suggests, as long as what they really want is a proprietary spec. But if they want it open I would ask what they like about it and name a few attributes unless they are not giving you enough time to do that. ---
**Author:** ![jpjordan](https://avatars.discourse-cdn.com/v4/letter/j/67e7ee/32.png) [@jpjordan](https://forum.4specs.com/u/jpjordan)\ **Post date:** [May 25, 2018, 2:38pm UTC](https://forum.4specs.com/t/specifying-ikea/3410/7 "2018-05-25T14:38:48Z")
The accessibility issue may or may not be a problem depending on the building occupancy. Here in Texas, an accessibility consultant will review the Drawings for compliance with the Texas Accessibility Standards and then inspect it after it is built. If it doesn’t pass, it may not get a permit or a Certificate of Occupancy. ---
**Author:** ![robeswan](https://avatars.discourse-cdn.com/v4/letter/r/bc79bd/32.png) [@robeswan](https://forum.4specs.com/u/robeswan)\ **Post date:** [May 29, 2018, 4:07pm UTC](https://forum.4specs.com/t/specifying-ikea/3410/8 "2018-05-29T16:07:08Z")
Peter: So the bottom line is you are trying to save the designers from themselves. Suggest to the designers that an additional height at the toe boards are required for the ADA units and let them decide to foul up themselves or accept some advice. ---
**Author:** ![jpjordan](https://avatars.discourse-cdn.com/v4/letter/j/67e7ee/32.png) [@jpjordan](https://forum.4specs.com/u/jpjordan)\ **Post date:** [May 30, 2018, 12:42pm UTC](https://forum.4specs.com/t/specifying-ikea/3410/9 "2018-05-30T12:42:41Z")
Robert’s suggestion about modifying the toe space is worth looking at. I guess I view one of my services is saving the my clients from themselves. It is sometimes impossible to save them from the Owner. Some of them listen when I talk about the responsibility attached to stamping the Drawings while others just roll their eyes and say they have to serve the Owner. At the end of the day, unless it is a code issue (which this could be), we follow the golden rule–he (or she) who has the gold makes the rules.