# Rain Chains

**URL:** <https://forum.4specs.com/t/rain-chains/670>\
**Category:** Archive - Product Discussions #3\
**Created:** [December 29, 2006, 7:59pm UTC](https://forum.4specs.com/t/rain-chains/670 "2006-12-29T19:59:15Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![don\_harris](https://avatars.discourse-cdn.com/v4/letter/d/e36b37/32.png) [@don\_harris](https://forum.4specs.com/u/don_harris)\
**Post date:** [December 29, 2006, 7:59pm UTC](https://forum.4specs.com/t/rain-chains/670/1 "2006-12-29T19:59:15Z")

</div>

We have a client who wants to use rain chains at the entrance canopy of a commercial office building. Any experience pro and con, as to whether this is an acceptable use of a rain chain would be appreciated. Thanks. Happy New Year to all.

---

<div class="post-metadata">

**Author:** ![lynn\_javoroski](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/lynn_javoroski/32/188_2.png) [@lynn\_javoroski](https://forum.4specs.com/u/lynn_javoroski)\
**Post date:** [December 29, 2006, 8:08pm UTC](https://forum.4specs.com/t/rain-chains/670/2 "2006-12-29T20:08:20Z")

</div>

Depending on the location and traffic, this would seem to be inappropriate. Lovely, perhaps, but they might invite vandalism (think attractive nuisance). (and Happy New Year to you, too)

---

<div class="post-metadata">

**Author:** ![sheldon\_wolfe](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/sheldon_wolfe/32/197_2.png) [@sheldon\_wolfe](https://forum.4specs.com/u/sheldon_wolfe)\
**Post date:** [December 29, 2006, 8:49pm UTC](https://forum.4specs.com/t/rain-chains/670/3 "2006-12-29T20:49:38Z")

</div>

This chain should be vandal-proof. Yes, vandal-proof, not vandal-resistant.  
[big chain](http://snipurl.com/164pv)

---

<div class="post-metadata">

**Author:** ![wyancey](https://avatars.discourse-cdn.com/v4/letter/w/b2d939/32.png) [@wyancey](https://forum.4specs.com/u/wyancey)\
**Post date:** [December 29, 2006, 9:02pm UTC](https://forum.4specs.com/t/rain-chains/670/4 "2006-12-29T21:02:39Z")

</div>

Don,

In the past my employer designed hot-dipped galvanized heavy link chain as rainwater leaders (downspouts) at the Agriculture Forestry Building at the University of Alberta campus in Edmonton, Alberta Canada. Bottom of chains connected at grade to a drain opening that is tightlined to a underground storm water system. Some where near entrances and exits that were protected with canopies. They did not seem to be a problem at the time. Rain fall in Edmonton is not as significant as snow fall in Edmonton. Rainwater was collected in gutters and discharged to the chains. Length of gutters was not excessive.

I have also seen them used at tea house type structures in Japanese gardens.

Look great.

I will dig deeper.

Wayne

---

<div class="post-metadata">

**Author:** ![wyancey](https://avatars.discourse-cdn.com/v4/letter/w/b2d939/32.png) [@wyancey](https://forum.4specs.com/u/wyancey)\
**Post date:** [December 29, 2006, 10:18pm UTC](https://forum.4specs.com/t/rain-chains/670/5 "2006-12-29T22:18:23Z")

</div>

Don,

More information.

My former employer recalls, the chain drops worked okay where they were relatively sheltered. They tend to spray around a bit especially when there is heavy rain. Probably the biggest problem is at the base. The detail for collection for the Ag Forestry was too small.

He has drawings around the office still. He will track them down next week, scan and email them to me.

I will contact you on this thread once I receive them.

Wayne

---

<div class="post-metadata">

**Author:** ![lazarcitec](https://avatars.discourse-cdn.com/v4/letter/l/3bc359/32.png) [@lazarcitec](https://forum.4specs.com/u/lazarcitec)\
**Post date:** [December 30, 2006, 12:24am UTC](https://forum.4specs.com/t/rain-chains/670/6 "2006-12-30T00:24:34Z")

</div>

Wayne  
We specified them for a project in Parkland, Florida, made of copper, for a high end Golf Club designed by a CALIF Architect. Unfortunately the rain chains were VE’d out, but the architectural firm had used them before and had recommended them highly. Wayne, if you like, I’ll send you an email with the firms’s contact info, they are a large firm in Irvine and I am still working with the Project Architect/Manager on that project for several current projects, he might be able to provide the info you seek.

---

<div class="post-metadata">

**Author:** ![lazarcitec](https://avatars.discourse-cdn.com/v4/letter/l/3bc359/32.png) [@lazarcitec](https://forum.4specs.com/u/lazarcitec)\
**Post date:** [December 30, 2006, 12:28am UTC](https://forum.4specs.com/t/rain-chains/670/7 "2006-12-30T00:28:07Z")

</div>

Ooops, I see it is Don who asked the original question. Don, send me your email address at [lazarcitec@msn.com](mailto:lazarcitec@msn.com) and I’ll forward their info to you.

---

<div class="post-metadata">

**Author:** ![don\_harris](https://avatars.discourse-cdn.com/v4/letter/d/e36b37/32.png) [@don\_harris](https://forum.4specs.com/u/don_harris)\
**Post date:** [January 2, 2007, 2:47pm UTC](https://forum.4specs.com/t/rain-chains/670/8 "2007-01-02T14:47:50Z")

</div>

Thanks for the great input. It is much appreciated.

---

<div class="post-metadata">

**Author:** ![julie\_root](https://avatars.discourse-cdn.com/v4/letter/j/e19adc/32.png) [@julie\_root](https://forum.4specs.com/u/julie_root)\
**Post date:** [January 2, 2007, 5:03pm UTC](https://forum.4specs.com/t/rain-chains/670/9 "2007-01-02T17:03:18Z")

</div>

I am seeing them a lot here in CA on LEED buildings especially at the front entrance ways. I think because they get more visual bang for the buck. In all cases I have seen where they have designed interesting rock areas for the chain to splash into so as not to cause big splashes. Sorry I do not have photos, but next time I see one I will try to remember to take a pic.

---

<div class="post-metadata">

**Author:** ![bunzick](https://avatars.discourse-cdn.com/v4/letter/b/a587f6/32.png) [@bunzick](https://forum.4specs.com/u/bunzick)\
**Post date:** [January 2, 2007, 7:20pm UTC](https://forum.4specs.com/t/rain-chains/670/10 "2007-01-02T19:20:51Z")

</div>

I have seen them in Florida using plastic chain. May be more vulnerable to vandalism, but it never rusts.

---

<div class="post-metadata">

**Author:** ![rm\_beard\_ccs](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/rm_beard_ccs/32/80_2.png) [@rm\_beard\_ccs](https://forum.4specs.com/u/rm_beard_ccs)\
**Post date:** [January 2, 2007, 8:15pm UTC](https://forum.4specs.com/t/rain-chains/670/11 "2007-01-02T20:15:55Z")

</div>

Don:  
Other factors to consider in addition to those previously mentioned (control of water at grade and vandalism, etc.) include the following:

1. Extent of overhangs. Chains don’t perform well when near the side walls.
2. Prevailing winds.
3. Height of fall.  
Ron

---

<div class="post-metadata">

**Author:** ![awhitacre](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/awhitacre/32/117_2.png) [@awhitacre](https://forum.4specs.com/u/awhitacre)\
**Post date:** [January 2, 2007, 9:36pm UTC](https://forum.4specs.com/t/rain-chains/670/12 "2007-01-02T21:36:58Z")

</div>

one way to deal with the high wind situation is to simply anchor the chain at the ground in some fashion. I agree that they can invite vandalism, but its a pretty common method for rainwater directing in the Seattle area because the chains are so easy to maintain. the splashing seems to be the only problem, and that can be easily remedied. I’m not so sure that they work well for areas that get deluges, but for a typical northwest winter, they do just fine.

---

<div class="post-metadata">

**Author:** ![rm\_beard\_ccs](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/rm_beard_ccs/32/80_2.png) [@rm\_beard\_ccs](https://forum.4specs.com/u/rm_beard_ccs)\
**Post date:** [January 3, 2007, 1:08am UTC](https://forum.4specs.com/t/rain-chains/670/13 "2007-01-03T01:08:41Z")

</div>

Anne:  
Your “typical northwest winter” is suspect by the rest of the country when we read about your getting 12" of rain per week.

The wind issue I have experienced is not that the chain moves, it is that the wind is stronger than the capillary action of the water clinging to the chain. Water spray is widely dispersed beyond the design intents or the containment systems. The higher the drop the larger the spread pattern. This is more of a concern in projects located in coastal areas.

---

<div class="post-metadata">

**Author:** ![wyancey](https://avatars.discourse-cdn.com/v4/letter/w/b2d939/32.png) [@wyancey](https://forum.4specs.com/u/wyancey)\
**Post date:** [January 4, 2007, 8:55pm UTC](https://forum.4specs.com/t/rain-chains/670/14 "2007-01-04T20:55:02Z")

</div>

Don,

I obtained some details for the AgForestry Bldg. Please e-mail me at [wyancey@weberthompson.com](mailto:wyancey@weberthompson.com)
