# Pre-Fab Toilet Rooms **URL:** \ **Category:** Archive - Specifications Discussions #6\ **Created:** [August 16, 2017, 5:24pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290 "2017-08-16T17:24:34Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![pbabinec](https://avatars.discourse-cdn.com/v4/letter/p/4bbf92/32.png) [@pbabinec](https://forum.4specs.com/u/pbabinec)\ **Post date:** [August 16, 2017, 5:24pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290/1 "2017-08-16T17:24:34Z")
Any thoughts on preparing a specification for a prefabricated toilet room? Healthcare setting. ---
**Author:** ![wilsonconsulting](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wilsonconsulting/32/128_2.png) [@wilsonconsulting](https://forum.4specs.com/u/wilsonconsulting)\ **Post date:** [August 16, 2017, 6:11pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290/2 "2017-08-16T18:11:06Z")
Phil, if you’re referring to off-site fabricated modular toilet room assemblies, I developed a Division 13 office master I’d be happy to share. My spec addresses the assembly of multiple components that are spec’d in other sections, along with provisions for protection, transit, storage & erection of modular units. It also allocates the division of work between factory & project site. Jeff at WilsonConsultingInc dot com ---
**Author:** ![gretaeckhardt](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/gretaeckhardt/32/105_2.png) [@gretaeckhardt](https://forum.4specs.com/u/gretaeckhardt)\ **Post date:** [August 16, 2017, 6:39pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290/3 "2017-08-16T18:39:54Z")
When I learned of these prefabricated toilet rooms a few years ago, I submitted a proposal to MasterFormat for a new number/title for Section 134213 - Bathroom Unit Modules, and it was accepted. Alas, I have not yet had the chance to write such a section. I imagine the specifications would be similar to those for a shower enclosure, but with electrical connections added, or perhaps to a controlled environment room if the prefabricated unit is a modular installation. ---
**Author:** ![jsandoz](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/jsandoz/32/84_2.png) [@jsandoz](https://forum.4specs.com/u/jsandoz)\ **Post date:** [August 17, 2017, 1:26pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290/4 "2017-08-17T13:26:15Z")
Jeffrey, I would like to see that specification also, especially since it addresses components specified in other sections. That seems to be the way some contractors are approaching pre-fabricated toilet rooms. My e-mail is [jsandoz@fkp.com](mailto:jsandoz@fkp.com) ---
**Author:** ![lazarcitec](https://avatars.discourse-cdn.com/v4/letter/l/3bc359/32.png) [@lazarcitec](https://forum.4specs.com/u/lazarcitec)\ **Post date:** [August 17, 2017, 1:34pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290/5 "2017-08-17T13:34:31Z")
APPLAUSE for Jeffrey Wilson. He is an example of one of the benefits of this forum, a fellow specifier willing to help another specifier. I wish this was true in the real world, when I reach out to a fellow specifier in So Florida (if I can find one), I get nada. Jeffrey should get a round of applause from this forum, he is a gentleman and a scholar, as my late father would say. I have benefited from Jeffrey’s kindness in the past, his specs are well done, great guides. ---
**Author:** ![wilsonconsulting](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wilsonconsulting/32/128_2.png) [@wilsonconsulting](https://forum.4specs.com/u/wilsonconsulting)\ **Post date:** [August 17, 2017, 2:07pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290/6 "2017-08-17T14:07:38Z")
Thank you, Jerome – you are a gentleman as well. This forum has been tremendously helpful for me also, so kudos to Colin for creating and hosting, and many thanks to all participants. ---
**Author:** ![lazarcitec](https://avatars.discourse-cdn.com/v4/letter/l/3bc359/32.png) [@lazarcitec](https://forum.4specs.com/u/lazarcitec)\ **Post date:** [August 17, 2017, 2:15pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290/7 "2017-08-17T14:15:19Z")
Thanks Jeffrey, I’ve been called a lot worse (mostly by Contractors). Yes indeed, thank you Colin for your efforts, [4specs.com](http://4specs.com) is the best! Now that we are finished patting ourselves on the back, time to get back to writing specs. ---
**Author:** ![jsandoz](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/jsandoz/32/84_2.png) [@jsandoz](https://forum.4specs.com/u/jsandoz)\ **Post date:** [August 18, 2017, 1:34pm UTC](https://forum.4specs.com/t/pre-fab-toilet-rooms/3290/8 "2017-08-18T13:34:15Z")
Hear, hear! Thank you Jeffrey and everyone else on this forum who has helped make my work easier and BETTER. And tusen takk\* to Colin for maintaining this web site. \*“many thousand thanks” in Norwegian