# Plastic (PVC) trim with gypsum board

**URL:** <https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865>\
**Category:** Archive - Product Discussions #5\
**Created:** [January 4, 2012, 11:17pm UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865 "2012-01-04T23:17:32Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![rachapple](https://avatars.discourse-cdn.com/v4/letter/r/e8c25b/32.png) [@rachapple](https://forum.4specs.com/u/rachapple)\
**Post date:** [January 4, 2012, 11:17pm UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/1 "2012-01-04T23:17:32Z")

</div>

Does anyone specify plastic (PVC)trim for gypsum board. I had a presentation by Trim Tex and their products appear to have advantages over metal but I typically spec metal or paper faced metal trim. Any experience out there with plastic trim?

---

<div class="post-metadata">

**Author:** ![nwoods](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/nwoods/32/215_2.png) [@nwoods](https://forum.4specs.com/u/nwoods)\
**Post date:** [January 5, 2012, 2:22am UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/2 "2012-01-05T02:22:35Z")

</div>

I do in multi-family, particularly in living areas with lots of southerly windows. The thermal expansion in metal trims seems to cause failures, particularly at bullnose corners.

---

<div class="post-metadata">

**Author:** ![bunzick](https://avatars.discourse-cdn.com/v4/letter/b/a587f6/32.png) [@bunzick](https://forum.4specs.com/u/bunzick)\
**Post date:** [January 5, 2012, 2:15pm UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/3 "2012-01-05T14:15:14Z")

</div>

I had traditionally specified metal on commercial work, but never had any good reason to do so except a bias against “plastic.” I can’t defend that position. There are lots of nifty trims in plastic. My favorite is one that drywallers use up against, for example, a window frame. It has a strip that can be “zipped” out after mudding, leaving a very clean, neat edge with no mud on the frame.

One product I investigated but never actually used is an extremely abuse-resistant corner bead. Even in relatively mild levels of traffic, metal corner bead dents too easily. The heavy duty stuff takes a wicked pounding, and avoids using ugly and expensive corner guards. Gordon makes an aluminum one, and there’s a plastic one I can’t remember the name of which may even be better.

---

<div class="post-metadata">

**Author:** ![robin](https://avatars.discourse-cdn.com/v4/letter/r/e5b9ba/32.png) [@robin](https://forum.4specs.com/u/robin)\
**Post date:** [December 5, 2013, 9:16pm UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/4 "2013-12-05T21:16:44Z")

</div>

Has anyone used No-coat Structural Laminate drywall corners? [http://www.no-coat.com/.docs/pg/10250](http://www.no-coat.com/.docs/pg/10250)  
Curious how they perform compared to metal, flanged corner beads. Pros, cons etc?

---

<div class="post-metadata">

**Author:** ![wilsonconsulting](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wilsonconsulting/32/128_2.png) [@wilsonconsulting](https://forum.4specs.com/u/wilsonconsulting)\
**Post date:** [December 6, 2013, 3:21am UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/5 "2013-12-06T03:21:20Z")

</div>

I have spec’d them for years, and include them in my office master Gyp Board spec as a suggestion for projects where hard use is anticipated.

Clients are especially happy w/ them in student areas. Apparently it is possible to hit them w/ a baseball bat and do very little or no damage. Several clients want these spec’d for all outside GWB corners in school projects.

---

<div class="post-metadata">

**Author:** ![robin](https://avatars.discourse-cdn.com/v4/letter/r/e5b9ba/32.png) [@robin](https://forum.4specs.com/u/robin)\
**Post date:** [August 11, 2014, 2:43pm UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/6 "2014-08-11T14:43:10Z")

</div>

I recently had a contractor submit a substitution request saying “vinyl and paper faced trim are the industry standard” and metal trim is obsolete. Curious if ya’all would agree?

---

<div class="post-metadata">

**Author:** ![wayne\_yancey](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wayne_yancey/32/228_2.png) [@wayne\_yancey](https://forum.4specs.com/u/wayne_yancey)\
**Post date:** [August 11, 2014, 2:57pm UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/7 "2014-08-11T14:57:40Z")

</div>

In my region (PNW), paper-faced metal such as from USG or Beadex is the prefered for commercial work.

All metal nail-on is popular with home builders. Very rigid. Finishing coats chip off easily from impact. Used throughout my circa 1997 home.

For my 2012 addition, I let the drywall taper use what he favors. He favors the paper-faced metal.

Saying “vinyl and paper faced trim are the industry standard” and metal trim is obsolete is not valid grounds for a substitution. It is to the contractors advantage ($$$) to make the change. If contractors says no $ change, contractor is most likey talking bovine scatology.

Enforce the spec unless it can be demonstrated the substitution is equal or superior, no change in warranty, etc.

---

<div class="post-metadata">

**Author:** ![khercenberg](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/khercenberg/32/104_2.png) [@khercenberg](https://forum.4specs.com/u/khercenberg)\
**Post date:** [August 11, 2014, 6:12pm UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/8 "2014-08-11T18:12:23Z")

</div>

I second Waynes observation

---

<div class="post-metadata">

**Author:** ![david\_j\_wyatt\_cdt](https://avatars.discourse-cdn.com/v4/letter/d/9d8465/32.png) [@david\_j\_wyatt\_cdt](https://forum.4specs.com/u/david_j_wyatt_cdt)\
**Post date:** [August 12, 2014, 1:49pm UTC](https://forum.4specs.com/t/plastic-pvc-trim-with-gypsum-board/1865/9 "2014-08-12T13:49:35Z")

</div>

Wayne:

Bovine scatology. Brilliant! Made my day and it is still early.
