# Insulating glazing units with integral blinds. **URL:** \ **Category:** Archive - Product Discussions #3\ **Created:** [September 21, 2007, 2:27pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891 "2007-09-21T14:27:42Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![lynn\_jolley](https://avatars.discourse-cdn.com/v4/letter/l/8491ac/32.png) [@lynn\_jolley](https://forum.4specs.com/u/lynn_jolley)\ **Post date:** [September 21, 2007, 2:27pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/1 "2007-09-21T14:27:42Z")
What company manufactures insulating glazing units with integral blinds? ---
**Author:** ![Rliebing](https://avatars.discourse-cdn.com/v4/letter/r/c57346/32.png) [@Rliebing](https://forum.4specs.com/u/Rliebing)\ **Post date:** [September 21, 2007, 2:30pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/2 "2007-09-21T14:30:37Z")
Pella? Andersen? Commercial or residential? ---
**Author:** ![mchavez](https://avatars.discourse-cdn.com/v4/letter/m/bc79bd/32.png) [@mchavez](https://forum.4specs.com/u/mchavez)\ **Post date:** [September 21, 2007, 2:34pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/3 "2007-09-21T14:34:33Z")
I know pella has them – as well as the ability to place “art panels” inbetween. But the inbetween is between an insulated unit and a third piece of glass. This way the sealed unit stays sealed. ---
**Author:** ![lynn\_javoroski](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/lynn_javoroski/32/188_2.png) [@lynn\_javoroski](https://forum.4specs.com/u/lynn_javoroski)\ **Post date:** [September 21, 2007, 2:54pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/4 "2007-09-21T14:54:11Z")
Check Unicel - Vision Control. ---
**Author:** ![awhitacre](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/awhitacre/32/117_2.png) [@awhitacre](https://forum.4specs.com/u/awhitacre)\ **Post date:** [September 21, 2007, 6:14pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/5 "2007-09-21T18:14:20Z")
Traco and Eclipse are two others. ---
**Author:** ![lynn\_jolley](https://avatars.discourse-cdn.com/v4/letter/l/8491ac/32.png) [@lynn\_jolley](https://forum.4specs.com/u/lynn_jolley)\ **Post date:** [September 21, 2007, 6:34pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/6 "2007-09-21T18:34:33Z")
These are for windows in a hospital. ---
**Author:** ![Anonymous](https://avatars.discourse-cdn.com/v4/letter/a/8491ac/32.png) [@Anonymous](https://forum.4specs.com/u/Anonymous)\ **Post date:** [September 21, 2007, 6:55pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/7 "2007-09-21T18:55:19Z")
Most alum window mfrs have between-glass blind option; you generally have to find the (buried) info in mfrs websites. EFCO, Kawneer (Alcoa), Graham, Wausau. ---
**Author:** ![redseca2](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/redseca2/32/50_2.png) [@redseca2](https://forum.4specs.com/u/redseca2)\ **Post date:** [September 21, 2007, 6:55pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/8 "2007-09-21T18:55:30Z")
We have a project underway that is using a Kawneer sourced window with integral blinds for hospital patient rooms. The resulting window units are “triple glazed” with the building standard IGU, then a 2-inch clear or so air space holding the blind, and a interior casement hinged single light that can be opened for maintenance. The window operators route into the mullion and can only adjust the blade angle, not raise or lower the blind. We were unable to make the operators conform to accessibility criteria, and this being California and an OSHPD project, that means we had to remove the handles and make them only operable with a “special tool” that only the staff have access to. We have also used the Unicell product for interiors, but they are very expensive, based in Quebec, and can be fiddley to deal with. ---
**Author:** ![Anonymous](https://avatars.discourse-cdn.com/v4/letter/a/8491ac/32.png) [@Anonymous](https://forum.4specs.com/u/Anonymous)\ **Post date:** [September 21, 2007, 8:31pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/9 "2007-09-21T20:31:49Z")
> **[Window Accessory Company Inc. - Between Glass Blinds](https://waci.us/)** > > Window Accessory Company Inc. produces 100% American made Between Glass Blinds including Metal and Venetian styles. Learn more & check out our products now! ---
**Author:** ![awhitacre](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/awhitacre/32/117_2.png) [@awhitacre](https://forum.4specs.com/u/awhitacre)\ **Post date:** [September 21, 2007, 8:58pm UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/10 "2007-09-21T20:58:30Z")
with those windows with integral blinds, you need to pay attention to where the operator is. And Steve is correct about most of the manufacturers – you have option only to tilt the blinds, not pull them up or let them down. in ICU areas (where these are often used) the operator can be an infection agent, so typically the blind operator (a small knob) is on the corridor - non-patient room – side of the opening and is operable by staff only. ---
**Author:** ![lynn\_jolley](https://avatars.discourse-cdn.com/v4/letter/l/8491ac/32.png) [@lynn\_jolley](https://forum.4specs.com/u/lynn_jolley)\ **Post date:** [September 22, 2007, 11:23am UTC](https://forum.4specs.com/t/insulating-glazing-units-with-integral-blinds/891/11 "2007-09-22T11:23:30Z")
Thanks. This information is very helpful. I love this forum.