# Epoxy Ramps

**URL:** <https://forum.4specs.com/t/epoxy-ramps/1145>\
**Category:** MasterFormat 2004 Discussions\
**Created:** [October 15, 2008, 2:47pm UTC](https://forum.4specs.com/t/epoxy-ramps/1145 "2008-10-15T14:47:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rliebing](https://avatars.discourse-cdn.com/v4/letter/r/c57346/32.png) [@Rliebing](https://forum.4specs.com/u/Rliebing)\
**Post date:** [October 15, 2008, 2:47pm UTC](https://forum.4specs.com/t/epoxy-ramps/1145/1 "2008-10-15T14:47:26Z")

</div>

Jump ball, folks!

Suggest Division and Section number for an epoxy polymer/ aggregate “concoction” to be used for new ramps in an industrial plant.

This is not an additive to ready-mix. Have data on product but need place for it in specs.

---

<div class="post-metadata">

**Author:** ![specman](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/specman/32/222_2.png) [@specman](https://forum.4specs.com/u/specman)\
**Post date:** [October 15, 2008, 2:54pm UTC](https://forum.4specs.com/t/epoxy-ramps/1145/2 "2008-10-15T14:54:32Z")

</div>

Ralph, look at 09 67 00 “Fluid-Applied Flooring” in your MasterFormat book and see if any of the Level 3 titles fit your product.