# decking detail mark thing?

**URL:** <https://forum.4specs.com/t/decking-detail-mark-thing/1086>\
**Category:** Archive - Specifications Discussions #3\
**Created:** [July 18, 2008, 5:33pm UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086 "2008-07-18T17:33:07Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Anonymous](https://avatars.discourse-cdn.com/v4/letter/a/8491ac/32.png) [@Anonymous](https://forum.4specs.com/u/Anonymous)\
**Post date:** [July 18, 2008, 5:33pm UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/1 "2008-07-18T17:33:07Z")

</div>

brand new to this… does anyone know what the detail mark on drawings is called that represents the decking span, bundle, and # of pieces?

---

<div class="post-metadata">

**Author:** ![wayne\_yancey](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wayne_yancey/32/228_2.png) [@wayne\_yancey](https://forum.4specs.com/u/wayne_yancey)\
**Post date:** [July 18, 2008, 5:44pm UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/2 "2008-07-18T17:44:15Z")

</div>

My current structural drawing call it "STRUCTURAL ARROW (DIRECTION OF SPAN). A typcial line with 1/2 of a leader arrow each end, on opposite sides. Bundle and # of pieces not included.

---

<div class="post-metadata">

**Author:** ![mark\_gilligan](https://avatars.discourse-cdn.com/v4/letter/m/f05b48/32.png) [@mark\_gilligan](https://forum.4specs.com/u/mark_gilligan)\
**Post date:** [July 19, 2008, 7:29am UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/3 "2008-07-19T07:29:25Z")

</div>

Wayne described one of a number of different symbols.

Another one is a circle with lines inside parallel to the direction of the flutes. The lines are intended to read as the deck flutes.

Typically this symbol has a letter or number that is tied back to a deck schedule which defines deck style, deck gage, and spacing of deck attachments.

Bundle information or number of pieces would not be shown on the structural drawings. You would only see this information on deck shop drawings.

The question is not clear as to the context where the deck symbol would be used. Typically an engineer who is calling out deck material is familiar with one of the common symbols. I cannot imagine such a symbol being shown on the architectural drawings.

---

<div class="post-metadata">

**Author:** ![wayne\_yancey](https://yyz1.discourse-cdn.com/flex047/user_avatar/forum.4specs.com/wayne_yancey/32/228_2.png) [@wayne\_yancey](https://forum.4specs.com/u/wayne_yancey)\
**Post date:** [July 21, 2008, 2:26pm UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/4 "2008-07-21T14:26:30Z")

</div>

Doh!

I should have directed you to the National CAD Standards for their module on graphics and symbols.

Wayne

---

<div class="post-metadata">

**Author:** ![mark\_gilligan](https://avatars.discourse-cdn.com/v4/letter/m/f05b48/32.png) [@mark\_gilligan](https://forum.4specs.com/u/mark_gilligan)\
**Post date:** [July 21, 2008, 4:00pm UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/5 "2008-07-21T16:00:40Z")

</div>

I have yet to find a structural engineering office that attempts to follow the National CAD standards. I would doubt that many even have a copy.

From what I gather the structural engineering community has not been involved in the National CAD Standards process.

The one convention from the National CAD standards that has been adopted is the drawing layer naming convention whereby structural layers start with an “S”

---

<div class="post-metadata">

**Author:** ![presbspec](https://avatars.discourse-cdn.com/v4/letter/p/e95f7d/32.png) [@presbspec](https://forum.4specs.com/u/presbspec)\
**Post date:** [July 21, 2008, 6:04pm UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/6 "2008-07-21T18:04:47Z")

</div>

Actually Mark, I know of at least one firm in Va Beach is using it. Stroud Pence Assoc. My husband works for them.

---

<div class="post-metadata">

**Author:** ![udsman](https://avatars.discourse-cdn.com/v4/letter/u/df705f/32.png) [@udsman](https://forum.4specs.com/u/udsman)\
**Post date:** [July 21, 2008, 8:57pm UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/7 "2008-07-21T20:57:17Z")

</div>

In response to Mark Gilligan’s comments, if the NCS is not used in some workplaces, please do not assume that few are using it - There are many structural engineers using the NCS including those in A/E and E/A firms (to date the NCS is in more than 5,000 workplaces and is the most widely used CAD standard in the construction industry).

Even though the structural design community has provided valuable input into the development of the NCS since the original release of NCS v1.0 in 1999 we still need more help from this user group. I encourage readers to join the NCS Project Committee at [www.nationalcadstandard.org](http://www.nationalcadstandard.org) and get behind the effort (there is no charge, other than owning a copy of NCS v4.0).

If structural designers need a symbol that is not in the current version, a graphic of the symbol can be submitted for adoption and we can include it quite easily in NCS v5.0.

FYI: Many are also unaware that printed output complying with NCS formats is a requirement for minimum BIM according to the National BIM Standard.

Hope this helps!

---

<div class="post-metadata">

**Author:** ![mark\_gilligan](https://avatars.discourse-cdn.com/v4/letter/m/f05b48/32.png) [@mark\_gilligan](https://forum.4specs.com/u/mark_gilligan)\
**Post date:** [July 22, 2008, 5:24am UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/8 "2008-07-22T05:24:24Z")

</div>

I looked on the NCS web site and came away with several observations.

One impediment to more people becoming familiar with the NCS is the Cost. It apparently costs $410 for a single copy.

While individual firms are members it appears that none of the structural engineering organizations have officially participated in the effort.

Looking on the forums I had the impression that CAD layer naming is very much a work in progress.

While there are undoubtedly some structural firms using the NCS, my sense is that in Northern California that there has not been wide acceptance. It would be interesting if there were a survey of the level of compliance of NCS firms. If the standard is adopted in one office is it also used in all other offices?

---

<div class="post-metadata">

**Author:** ![Anonymous](https://avatars.discourse-cdn.com/v4/letter/a/8491ac/32.png) [@Anonymous](https://forum.4specs.com/u/Anonymous)\
**Post date:** [July 22, 2008, 6:54pm UTC](https://forum.4specs.com/t/decking-detail-mark-thing/1086/9 "2008-07-22T18:54:40Z")

</div>

If they have members of CSI in the firm, it can be ordered for half that cost through the CSI Bookstore!
