# Archive - Product Discussions #2

**URL:** https://forum.4specs.com/c/archive-of-older-topics/archive-product-discussions-2/19.md

[Latest](https://forum.4specs.com/latest.md) · [Categories](https://forum.4specs.com/categories.md) · [Tags](https://forum.4specs.com/tags.md)

---

## [About the Archive - Product Discussions #2 category](https://forum.4specs.com/t/about-the-archive-product-discussions-2-category/4192)

<div class="topic-metadata">

**Author:** [@system](https://forum.4specs.com/u/system)\
**Replies:** 0\
**Last updated:** [July 8, 2026, 7:30pm UTC](https://forum.4specs.com/t/about-the-archive-product-discussions-2-category/4192 "2026-07-08T19:30:52Z")

</div>

---

## [Paint for suspended ceilings](https://forum.4specs.com/t/paint-for-suspended-ceilings/555)

<div class="topic-metadata">

**Author:** [@David\_Axt](https://forum.4specs.com/u/David_Axt)\
**Replies:** 6\
**Last updated:** [May 17, 2006, 11:51am UTC](https://forum.4specs.com/t/paint-for-suspended-ceilings/555 "2006-05-17T11:51:21Z")

</div>

What paint do you guys recommend for painting acoustical ceiling grids and panels? These panels are for new construction and not an existing remodel. Do you recommend that the wholes system be painted at once or paint …

---

## [Product Lunches - How Often?](https://forum.4specs.com/t/product-lunches-how-often/546)

<div class="topic-metadata">

**Author:** [@David\_Axt](https://forum.4specs.com/u/David_Axt)\
**Replies:** 6\
**Last updated:** [May 12, 2006, 7:28pm UTC](https://forum.4specs.com/t/product-lunches-how-often/546 "2006-05-12T19:28:46Z")

</div>

Who here sets up product lunches for your office? How often do you have them? Do you feel that these product lunches offer value to the staff? The firm I work for used to have product lunches every week, sometimes twi…

---

## [Galvanized vs Primed Finish on Cold Formed Metal Framing](https://forum.4specs.com/t/galvanized-vs-primed-finish-on-cold-formed-metal-framing/552)

<div class="topic-metadata">

**Author:** [@robin](https://forum.4specs.com/u/robin)\
**Replies:** 9\
**Last updated:** [May 12, 2006, 3:30pm UTC](https://forum.4specs.com/t/galvanized-vs-primed-finish-on-cold-formed-metal-framing/552 "2006-05-12T15:30:08Z")

</div>

I have always spec’d galvanized finish and I have a request to provide primed cold formed metal framing in lieu of galvanized. The project is in Las Vegas - relatively dry in summers, but pretty wet in the winters. I r…

---

## [Wood Preservatives (Again)](https://forum.4specs.com/t/wood-preservatives-again/358)

<div class="topic-metadata">

**Author:** [@brett](https://forum.4specs.com/u/brett)\
**Replies:** 6\
**Last updated:** [April 25, 2006, 6:16pm UTC](https://forum.4specs.com/t/wood-preservatives-again/358 "2006-04-25T18:16:12Z")

</div>

I saw that there was a previous thread, but it looks like it hadn’t been updated in over a year so I thought I would start it up again and see if anyone has any new inforamtion on CCA and ACQ. I’ve hear it recently that…

---

## [Level 4 Specifying](https://forum.4specs.com/t/level-4-specifying/529)

<div class="topic-metadata">

**Author:** [@Dean\_e\_mccarty](https://forum.4specs.com/u/Dean_e_mccarty)\
**Replies:** 18\
**Last updated:** [April 14, 2006, 4:24pm UTC](https://forum.4specs.com/t/level-4-specifying/529 "2006-04-14T16:24:25Z")

</div>

What is the practice of my fellow spec writers in using narrow scope, er, I mean, uh, Level 4 sections for products such as Vapor Retarders and Non-Structural Metal Framing? Most of my projects are less than $5M, and I …

---

## [Roof Sealant](https://forum.4specs.com/t/roof-sealant/524)

<div class="topic-metadata">

**Author:** [@Rliebing](https://forum.4specs.com/u/Rliebing)\
**Replies:** 11\
**Last updated:** [April 10, 2006, 6:50am UTC](https://forum.4specs.com/t/roof-sealant/524 "2006-04-10T06:50:47Z")

</div>

For various joints in connection with roofing, flashing, roof/wall joints, etc., any one heard of DURATHANE? Who is the manufacturer? Indication to us is Tremco, but we find no such product on their site or in their b…

---

## [Ceramic Tile over Gypcrete over Plywood Subfloor](https://forum.4specs.com/t/ceramic-tile-over-gypcrete-over-plywood-subfloor/522)

<div class="topic-metadata">

**Author:** [@lazarcitec](https://forum.4specs.com/u/lazarcitec)\
**Replies:** 6\
**Last updated:** [March 25, 2006, 3:09pm UTC](https://forum.4specs.com/t/ceramic-tile-over-gypcrete-over-plywood-subfloor/522 "2006-03-25T15:09:00Z")

</div>

Boy, I thought I’d get a break and leave the office early, still haven’t packed - other than the fact that I will need to specify a waterproof membrane between the CT and the Gypcrete - any other thoughts? Pros and Cons…

---

## [Joints in EIFS](https://forum.4specs.com/t/joints-in-eifs/519)

<div class="topic-metadata">

**Author:** [@Bonnie\_Baffer](https://forum.4specs.com/u/Bonnie_Baffer)\
**Replies:** 7\
**Last updated:** [March 21, 2006, 1:10pm UTC](https://forum.4specs.com/t/joints-in-eifs/519 "2006-03-21T13:10:13Z")

</div>

We are replacing EIFS on a 3 story, 22 year old bldg. There is existing steel stud framing. We had experienced leaks through vertical cracks in the EIFS, so plan to install new joints in the EIFS. We will replace the she…

---

## [Concrete topping slab thickness](https://forum.4specs.com/t/concrete-topping-slab-thickness/347)

<div class="topic-metadata">

**Author:** [@awhitacre](https://forum.4specs.com/u/awhitacre)\
**Replies:** 9\
**Last updated:** [March 9, 2006, 11:45pm UTC](https://forum.4specs.com/t/concrete-topping-slab-thickness/347 "2006-03-09T23:45:00Z")

</div>

I’ve got designers who want to put in a 1" thick concrete topping slab in a high traffic area, and I can’t find any “real” criteria that tells them not to do it. I have PLENTY of anecdotal and project experience that te…

---

## [Red Oxide Primer](https://forum.4specs.com/t/red-oxide-primer/490)

<div class="topic-metadata">

**Author:** [@brett](https://forum.4specs.com/u/brett)\
**Replies:** 23\
**Last updated:** [March 9, 2006, 7:44pm UTC](https://forum.4specs.com/t/red-oxide-primer/490 "2006-03-09T19:44:13Z")

</div>

Recently, we had a contractor come back to us with a substitution request for shop-applied red-oxide primer on structural steel, stating that it was banned for use. I immediately new something was not right, I know zinc…

---

## [BIG seismic joints](https://forum.4specs.com/t/big-seismic-joints/513)

<div class="topic-metadata">

**Author:** [@julie\_root](https://forum.4specs.com/u/julie_root)\
**Replies:** 6\
**Last updated:** [February 28, 2006, 5:03pm UTC](https://forum.4specs.com/t/big-seismic-joints/513 "2006-02-28T17:03:33Z")

</div>

Any advice on products that can handle big seismic joints? 18"-20" nominal dimension. C/S and others seem to only go to 16". I am working on a public school in CA. We have the added code changes and a DSA review that…

---

## [Traffic Coatings](https://forum.4specs.com/t/traffic-coatings/511)

<div class="topic-metadata">

**Author:** [@Anonymous](https://forum.4specs.com/u/Anonymous)\
**Replies:** 7\
**Last updated:** [February 24, 2006, 7:07pm UTC](https://forum.4specs.com/t/traffic-coatings/511 "2006-02-24T19:07:55Z")

</div>

Any traffic coating experts out there that can offer equivalent systems to NeoGard’s “Deocartive Peda Gard” system? I need 2 more… With 3M backing out of this market, I am looking for another manufacturer to replace my…

---

## [Historic Restoration Specs](https://forum.4specs.com/t/historic-restoration-specs/512)

<div class="topic-metadata">

**Author:** [@m2architek](https://forum.4specs.com/u/m2architek)\
**Replies:** 8\
**Last updated:** [February 23, 2006, 10:15pm UTC](https://forum.4specs.com/t/historic-restoration-specs/512 "2006-02-23T22:15:18Z")

</div>

Is there anyone that specializes in, or can direct me to someone, or firm that can assist in the preparation of these documents?

---

## [Half-round windows](https://forum.4specs.com/t/half-round-windows/507)

<div class="topic-metadata">

**Author:** [@jwbrittell](https://forum.4specs.com/u/jwbrittell)\
**Replies:** 6\
**Last updated:** [February 13, 2006, 11:58pm UTC](https://forum.4specs.com/t/half-round-windows/507 "2006-02-13T23:58:49Z")

</div>

Does anyone know the term that describes the half-round windows above a door? I’ve tried a few dictionaries without success.

---

## [Any Ideas?](https://forum.4specs.com/t/any-ideas/502)

<div class="topic-metadata">

**Author:** [@Rliebing](https://forum.4specs.com/u/Rliebing)\
**Replies:** 6\
**Last updated:** [February 3, 2006, 5:48pm UTC](https://forum.4specs.com/t/any-ideas/502 "2006-02-03T17:48:46Z")

</div>

Asking for direction to any film that can be applied to existing clear glass, to give it a tint and reduce light trasnmission without being totally opaque, and which will not void any glass warranties? Thanks much!

---

## [Sprayed foam insulation](https://forum.4specs.com/t/sprayed-foam-insulation/500)

<div class="topic-metadata">

**Author:** [@susan\_mcclendon](https://forum.4specs.com/u/susan_mcclendon)\
**Replies:** 15\
**Last updated:** [February 2, 2006, 4:53pm UTC](https://forum.4specs.com/t/sprayed-foam-insulation/500 "2006-02-02T16:53:37Z")

</div>

Does anyone have any experience with Icynene foam insulation? Do you know what material it is? (Their literature doesn’t say, other than it’s water-based.)

---

## [Wood veneer on steel doors](https://forum.4specs.com/t/wood-veneer-on-steel-doors/498)

<div class="topic-metadata">

**Author:** [@David\_Axt](https://forum.4specs.com/u/David_Axt)\
**Replies:** 8\
**Last updated:** [January 30, 2006, 5:18pm UTC](https://forum.4specs.com/t/wood-veneer-on-steel-doors/498 "2006-01-30T17:18:24Z")

</div>

Does anybody know of a product that is real wood veneer laminated to steel doors? Steelcraft has a product that is not real wood and looks rather cheap. I know I have seen real unfinished wood on a steel frame before. …

---

## [Chain Link Fence](https://forum.4specs.com/t/chain-link-fence/448)

<div class="topic-metadata">

**Author:** [@woodr5678](https://forum.4specs.com/u/woodr5678)\
**Replies:** 9\
**Last updated:** [January 23, 2006, 9:57pm UTC](https://forum.4specs.com/t/chain-link-fence/448 "2006-01-23T21:57:29Z")

</div>

I’ve checked what seems like a dozen sources and have as many answers. I’m trying to determine the height of chain link fences that require a Mid-Rail. MasterSpec says for fences 6’ or higher. My specs say 8’ or higher…

---

## [New Manufacturer?](https://forum.4specs.com/t/new-manufacturer/489)

<div class="topic-metadata">

**Author:** [@dbrinley](https://forum.4specs.com/u/dbrinley)\
**Replies:** 9\
**Last updated:** [January 19, 2006, 3:35pm UTC](https://forum.4specs.com/t/new-manufacturer/489 "2006-01-19T15:35:52Z")

</div>

Have you guys heard of Or Approved Equal? They make everything! If you’ve got their catalog, let me know.

---

## [Polished Brass Handrails for the Exterior](https://forum.4specs.com/t/polished-brass-handrails-for-the-exterior/488)

<div class="topic-metadata">

**Author:** [@rmaxwell](https://forum.4specs.com/u/rmaxwell)\
**Replies:** 6\
**Last updated:** [January 18, 2006, 8:01pm UTC](https://forum.4specs.com/t/polished-brass-handrails-for-the-exterior/488 "2006-01-18T20:01:23Z")

</div>

I’m looking for a polished brass tube handrail system for the exterior of a high end home near the water in Southern California. I understand that the quality of the tubing, the fittings and the finish are important as …

---

## [Anodize vs Paint Finishes](https://forum.4specs.com/t/anodize-vs-paint-finishes/226)

<div class="topic-metadata">

**Author:** [@woodr5678](https://forum.4specs.com/u/woodr5678)\
**Replies:** 33\
**Last updated:** [January 9, 2006, 5:37pm UTC](https://forum.4specs.com/t/anodize-vs-paint-finishes/226 "2006-01-09T17:37:18Z")

</div>

Entrances and Storefronts: Which is better, anodized or paint finishes (Esp or powder coat)? Doesn’t anodized (show ware) have chemical when in contact with people? Do you know of a website or article to address this …

---

## [Light Fixture Hangers](https://forum.4specs.com/t/light-fixture-hangers/474)

<div class="topic-metadata">

**Author:** [@brett](https://forum.4specs.com/u/brett)\
**Replies:** 6\
**Last updated:** [December 13, 2005, 11:35pm UTC](https://forum.4specs.com/t/light-fixture-hangers/474 "2005-12-13T23:35:02Z")

</div>

Anyone know where I can find how many wires are required to hang a 2x4 fluorescent fixture in a non-rated drop-in ceiling system? Yes, UL is for rated ceilings, but I can not find anywhere in IBC or NEC that states that…

---

## [rubberized concrete](https://forum.4specs.com/t/rubberized-concrete/477)

<div class="topic-metadata">

**Author:** [@lynn\_javoroski](https://forum.4specs.com/u/lynn_javoroski)\
**Replies:** 7\
**Last updated:** [December 13, 2005, 4:57am UTC](https://forum.4specs.com/t/rubberized-concrete/477 "2005-12-13T04:57:32Z")

</div>

In lieu of crushing concrete (for a demolition project where the crushed concrete is specified at 2" maximum size), a contractor has asked what the size requirement would be for “rubberizing concrete and masonry (possilb…

---

## [Zoo animal barrier](https://forum.4specs.com/t/zoo-animal-barrier/465)

<div class="topic-metadata">

**Author:** [@George\_Everding](https://forum.4specs.com/u/George_Everding)\
**Replies:** 7\
**Last updated:** [November 18, 2005, 1:21pm UTC](https://forum.4specs.com/t/zoo-animal-barrier/465 "2005-11-18T13:21:09Z")

</div>

I’ve been asked to track down a product that some of our designers have seen in zoos: a barrier composed of vertical piano wires held in tension. I am thinking that this is a custom fabrication, rather than an off the s…

---

## [Curtain Wall Manufacturers](https://forum.4specs.com/t/curtain-wall-manufacturers/464)

<div class="topic-metadata">

**Author:** [@lynn\_javoroski](https://forum.4specs.com/u/lynn_javoroski)\
**Replies:** 7\
**Last updated:** [November 18, 2005, 12:47am UTC](https://forum.4specs.com/t/curtain-wall-manufacturers/464 "2005-11-18T00:47:16Z")

</div>

We have a substitution request for CMI Architectural Products in lieu of Kawneer. Does anyone have experience with CMI - good or bad? Of course, per Murphy, I need information by noon today (11/16/05). Thanks!

---

## [Intumescent Coatings](https://forum.4specs.com/t/intumescent-coatings/316)

<div class="topic-metadata">

**Author:** [@lazarcitec](https://forum.4specs.com/u/lazarcitec)\
**Replies:** 20\
**Last updated:** [November 9, 2005, 7:48pm UTC](https://forum.4specs.com/t/intumescent-coatings/316 "2005-11-09T19:48:52Z")

</div>

Other than AD FireFilm II - anyone have used any other intumescent coating for steel columns - war stories accepted.

---

## [Minimum thickness of uncoated steel sheet](https://forum.4specs.com/t/minimum-thickness-of-uncoated-steel-sheet/445)

<div class="topic-metadata">

**Author:** [@wyancey](https://forum.4specs.com/u/wyancey)\
**Replies:** 18\
**Last updated:** [November 9, 2005, 6:44pm UTC](https://forum.4specs.com/t/minimum-thickness-of-uncoated-steel-sheet/445 "2005-11-09T18:44:12Z")

</div>

Does anyone have the definitive table for minimum thickness in decimals of an inch of uncoated steel sheet? Prior to 1970, sheet steel was referred to by gage. ASTM and ANSI currently do not list gage numbers in their …

---

## [finish coat breathability over lime plaster](https://forum.4specs.com/t/finish-coat-breathability-over-lime-plaster/407)

<div class="topic-metadata">

**Author:** [@Richard\_Baxter\_CSI](https://forum.4specs.com/u/Richard_Baxter_CSI)\
**Replies:** 10\
**Last updated:** [November 9, 2005, 4:57pm UTC](https://forum.4specs.com/t/finish-coat-breathability-over-lime-plaster/407 "2005-11-09T16:57:42Z")

</div>

Does anyone know how to determine if the breathability (or vapor permeability) of a finish coating is adequate for installation over historic lime plaster? All the information I have been able to attain has stated that …

---

## [Pella vs Weathershield](https://forum.4specs.com/t/pella-vs-weathershield/452)

<div class="topic-metadata">

**Author:** [@lynn\_jolley](https://forum.4specs.com/u/lynn_jolley)\
**Replies:** 11\
**Last updated:** [November 2, 2005, 6:59pm UTC](https://forum.4specs.com/t/pella-vs-weathershield/452 "2005-11-02T18:59:20Z")

</div>

I have a substitution requst to use Weathershield Aluma TFT windows instead of Pella Architect Series. The projected cost of the Weathershield windows are half that of the Pella Windows. This makes me very nervouse; how…

[Next page](https://forum.4specs.com/c/archive-of-older-topics/archive-product-discussions-2/19.md?page=1)
